使用Model Plot（模型繪圖）菜單查看更多關于模式的信息。
|Model Plot Menu（模型繪圖菜單） ||
| ------------- |:-------------:| :-----:|
打印繪圖
可以通過選擇File/Print菜單或使用工具欄打印響應曲線。詳細的打印布局需在頁面設置窗口中指定。
模型分析
模型編譯后，在樹結構的模型分析模塊顯示了模型（即操作輸入或測量干擾與輸出之間）的穩態增益。
顏色編碼用于指示存在的多斜坡關系，即青色/綠色/紅色分別為一次/二次/三次（及以上）斜坡。
增益信息可以通過右鍵鼠標并選擇所需格式方便地導出到MicrosoftExcel?電子表格。
注：當對應的輸出未表現出獨立貢獻的（斜坡）行為時，靜態增益計算可能是錯誤的。例如，如果一個輸出是由兩個幅度相等，但符號相反且動態不同的斜坡合成，則計算的有效靜態增益是零，但實際行為是非斜坡。
模型報告
樹形結構的模型報告模塊生成了一份HTML文檔。這份文件提供了模型結構及其相關參數的綜合概述。
鼠標右鍵菜單
將鼠標光標懸停在HTML報告上，用戶點擊鼠標右鍵，將出現Microsoft Internet Explorer菜單。有關此菜單的更多信息，請參閱Microsoft幫助文件。
原文：
Use the Model Plot menu to view additional information about the mode.
|Model Plot Menu ||
| ------------- |:-------------:| :-----:|
|
Print Plot
The response plots can be printed by either selecting the File/Print menu or by utilizing the toolbar. The detailed printing layout is specified in the page setup window.
Model Analysis
After a model is compiled, the Model Analysis module on the tree structure displays the steady state gain of the model, i.e. from the manipulated inputs and measured disturbances to the outputs.
Color-coding is used to indicate the presence of multi-ramping relationships, i.e. cyan/green/red for single/double/triple (and more) ramp, respectively.
The gain information is easily exported into a Microsoft Excel? spreadsheet by clicking the right button of the mouse and selecting the desired format.
NOTE: The static gain computation can be erroneous when the corresponding output does not exhibit the (ramping) behavior of its separate contributions. For example, if an output is made up of the sum of two ramps with equal magnitudes but opposite signs and different dynamics, the effective computed static gain is zero while the actual behavior is non-ramping.
Model Report
The Model Report module on the tree structure generates an HTML document. Such a document provides a synthetic overview of the model structure and of its associated parameters.
Right Mouse Button Menu
When the user clicks the right mouse button while the cursor is hovering over the HTML report, the Microsoft Internet Explorer menu appears. For more information about this menu, please refer to the Microsoft help files.
設計控制器
概述
SMOCPro中此模塊被用于為過程模型設計一個模型預測控制（MPC）型控制器。 SMOCPro采用了動態子控制器的概念;每個這樣的子控制器用于動態優化并控制工廠部分。與此相反，整個的工藝模型被用于解決靜態優化問題。
在SMOCPro中，離線控制器的設計和合成問題涉及到指定控制器目標，子控制器結構，子控制器目標范圍，動態和靜態約束，經濟函數等等。所得的控制器可用于SMOCPro離線仿真或EXASMOC在線實時控制。
注：當控制器模型重新編譯時，生成過程時需要對所有控制器重構。
Designing a Controller
Overview
This module in SMOCPro is used to design a Model Predictive Control (MPC)-type controller for the process model. SMOCPro employs the concept of dynamic sub-controllers; each such sub-controller performs dynamic optimization and control for a section of the plant. In contrast, the overall process model is used to solve the static optimization problem.
In SMOCPro, the offline controller design and synthesis problem involves specifying the controller objectives, sub-controller architecture, sub-controller objective scopes, dynamic and static constraints, economic functions, et cetera. The resulting controller can be used either offline within SMOCPro for simulation purposes or online with EXASMOC for actual, real time process control.
NOTE: When the controller model is recompiled, the resulting process requires that all controllers be e rebuilt.
2016.9.10
